Automatic Paper Roll Slitting Machine / Roll To Sheet Cutting
Equipment capable of slitting and rewinding, wood pulp spunlace
cloth, cloth, cloth, needle meltblown cloth, cloth, spunbond
sealing adopts the high quality servo control system, adjust the
line length, cutting burr, neat products: the machine is used for
processing with or without mandrel, wire or wire cutting is not
complex the volume of products, the use of a machine, according to
customer requirements of various production equipment to replace
the specific configuration, please contact us.
|Cutting device||cutting device.|
|Way to close the volume||Special pneumatic pressing device, technology and domestic leading|
|Cutting raw materials|
Spunlace cloth, non-woven, meltblown, Jakob, spunbond nonwovens and
be classified textile materials, such as paper cutting, with
material and the field test.
|Use power||Stepping motor|
|Production speed||60-100 M / min|
|Parameter setting||Color touch screen|
|Control program||PLC servo drive|
|Weight||of about 1000kg specific weight depending on the machine
|Compressed air||Customer owned|
|Customization||specific contact Sales Manager|
50HZ 2.2kW 380V
1. equipment requirements: unwinding and rewinding at the same
time. The end surface is neat and neat.
2. machine effective door width of 1800 mm, maximum diameter of
3. automatic counting stop function (infrared), power 3 kW
4. the take-up roller is enlarged with stepless speed change
device, and the take-up speed can be adjusted
5. place the original cloth with two sets of raw material unwinding
device, the gas expansion shaft unwinding, and stepless tension
adjusting device, and equipped with leather swelling force control
6 , the equipment is equipped with two sets of iron, fluorine,
volume, anti sticky mesh belt conveyor system, adjustable speed;
7, the machine can be adjusted to the maximum speed of 50 meters /
min. (according to the characteristics of the fabric speed)
8, roller with full row of pressure. Compression adjustment device,
gas expansion shaft winding.
9. The maximum diameter of the finished product is 1300 mm
(adjustable within 1300mm),
10, equipped with 8 high precision aluminum alloy and wrinkle.
1, the equipment can be produce non-woven medical points off sheet,
broken drum, wiping cloth off clean uniform cutting rewinding paper
2, production process, automatic feeding, wide belt synchronous
transmission, traction (dashed line), slitting, winding, transverse
uniformity is flat and level.
3, the equipment with pneumatic automatic feeding device, a set of;
The original cloth place put volume with gas rose axis, and with
wide belt conveyor, with stepless adjustable tension device,
rolling speed can be adjusted freely.
4, with a complete set of steel roller combined with rubber roller
traction, make the production smoothly, winding, not running
deviation, and pneumatic adjust up and down.
6, with adjustable circular points two sets of gear hob, used to
play the mouth bar, servo motor drive.
7, with adjustable steel to steel horizontal cross line device, two
sets of ?